Class FluteDependentRatioProfile

Namespace

Hi.Milling.Cutters

Assembly

HiMech.dll

The inner beam of a milling cutter as a bending-equivalent core whose ratio follows the flute count: the default InnerBeamProfile. The core is the flute profile (ZrListSource) scaled by RadiusRatio, so at every height it is the solid circle whose area moment of inertia is that of the whole fluted section, web and teeth together: its diameter is the bending-equivalent diameter of the literature (Kops & Vo 1990: about 0.8·D on two- and four-flute end mills; Bediz et al. 2012: 0.795·D on a sectioned four-flute carbide mill), not the web, the circle inscribed at the flute bottoms (0.4–0.6·D). One constant per cutter: the same ratio at every height, in every direction and on a ball nose as on a flat end, so a ball cutter's core follows its sphere; the section of one cutter goes in as a ConstRatioProfile. The table by flute count is GetInnerRadiusRatioByFluteNum below. The readers: the cutter beam (GetBeamCompliance(), I and A of each slice; Bediz measured the area-equivalent diameter at 0.78·D beside the inertia-equivalent 0.795·D, so one ratio serves both), the stress ratio (GetStressRatio(IMachiningTool, double): the same I, with the outer fibre at the flute profile's own radius), the shank mass estimate and the shank thermal nodes (the core's volume), and the flute drawing's inner edge. Saved as its element name alone (the ratio only in an XML comment, which the reader ignores), so a project saved with this profile reads the table of the build that loads it.

public class FluteDependentRatioProfile : IShaperProfile, IMakeXmlSource, IAbstractNote, IGetZrList, IGenStl, IDuplicate, IClearCache, IFluteNumSourceProperty, IZrListSourceProperty

Inheritance

object

FluteDependentRatioProfile

Implements

IShaperProfile

IMakeXmlSource

IAbstractNote

IGetZrList

IGenStl

IDuplicate

IClearCache

IFluteNumSourceProperty

IZrListSourceProperty

Inherited Members

object.Equals(object)

object.Equals(object, object)

object.GetHashCode()

object.GetType()

object.MemberwiseClone()

object.ReferenceEquals(object, object)

object.ToString()

Extension Methods

DuplicateUtil.TryDuplicate<TSelf>(TSelf, params object[])

InvokeUtil.SelfInvoke<TSrc>(TSrc, Action<TSrc>)

InvokeUtil.SelfInvoke<TSrc, TDst>(TSrc, Func<TSrc, TDst>)

ColorUtil.GetGloomyColor(object, double, double)

KindNameUtil.KindName(object)

NameUtil.GetSelectionName(object)

StringUtil.GetPropertyStringIfToStringNotOverloaded(object, bool, bool)

LockUtil.Lock(object)

Constructors

FluteDependentRatioProfile()

Initializes a new instance.

public FluteDependentRatioProfile()

FluteDependentRatioProfile(XElement, string)

Initializes a new instance of the FluteDependentRatioProfile class.

public FluteDependentRatioProfile(XElement element, string baseDirectory)

Parameters

element XElement

The XML element containing profile data.

baseDirectory string

The base directory for resolving relative paths.

Properties

AbstractNote

Gets the abstract note describing the profile.

public string AbstractNote { get; }

Property Value

string

FluteNumSource

Gets or sets a delegate that returns the current flute number.

public Func<int> FluteNumSource { get; set; }

Property Value

Func<int>

RadiusRatio

The bending-equivalent core ratio for the current flute count (FluteNumSource): the core's radius over the flute profile's radius at the same height, by the table of GetInnerRadiusRatioByFluteNum.

public double RadiusRatio { get; }

Property Value

double

XName

Name for XML IO.

public static string XName { get; }

Property Value

string

ZrListSource

Get base geometry source. Runtime property.

public Func<IGetZrList> ZrListSource { get; set; }

Property Value

Func<IGetZrList>

Methods

ClearCache()

Clears any cached data held by the implementing object.

public void ClearCache()

Duplicate(params object[])

Creates a deep copy of the object, excluding any source file references.

public object Duplicate(params object[] res)

Parameters

res object[]

Optional parameters that may be needed during the duplication process

Returns

object

A new instance that is a deep copy of the original object

GenStl(IPolarResolution2d)

Generates a new STL.

public Stl GenStl(IPolarResolution2d resolution)

Parameters

resolution IPolarResolution2d

Polar resolution

Returns

Stl

A newly created STL.

GetZrList()

Gets a list of Z-R coordinate pairs.

public List<PairZr> GetZrList()

Returns

List<PairZr>

A list of PairZr objects representing Z-R coordinates.

MakeXmlSource(string, string, bool)

Creates an XML representation of the object. This method may also generate additional resources such as related files.

public XElement MakeXmlSource(string baseDirectory, string relFile, bool exhibitionOnly)

Parameters

baseDirectory string

The base directory for resolving relative paths

relFile string

The relative file path for the XML source

exhibitionOnly bool

if true, the extended file creation is suppressed.

Returns

XElement

An XML element representing the object's state

Remarks

For the demand of easy moving source folder (especially project folder) without configuration file path corruption, the relative file path is applied. The baseDirectory is typically the folder at the nearest configuration file folder. Since the folder can be moving with the configuration file.

Reg(XFactory)

Registers this type's deserializer with the given XFactory and chains Reg(factory) on dependents. Idempotent.

public static void Reg(XFactory factory = null)

Parameters

factory XFactory